Want to see properly and be seen? Look no further!
Features
All at the touch of a button which mounts on your brake lever's screw. The design is soo slick and unobtrusive and yet at the reach of your fingertip.
Pressing the button once will turn on the white circle, and pressing again will toggle the Low Beam and High Beam modes.
Pressing and holding for more than a second will turn off the light
There are more hidden features inside, which can be toggled on/off as desired. Hence, by pressing repeatedly in a short pattern you can enable or disable any of the following options:
3* Toggle the white and yellow circles ON/OFF. OFF -> WHITE -> YELLOW -> OFF
4* pressing once on the button when the headlight is off, will turn on only the DRL. This can be useful during the day when you don't want to consume power with the low beam. Disabling this feature will skip the DRL step and start the low beam directly
5* The One Touch button is always "ON" as long as the battery key is ON, especially useful to see where the button is in the dark or e.g. when you suddenly enter a tunnel. However, at times, this might not be useful, so you could turn this feature off
6* The headlamp flashes the yellow circle every 5 seconds as the car drivers mostly notice the changes in their landscape. This is a safety feature. However it could be considered annoying to some, and hence it can be easily toggled when needed. 7* the turn signals will have an extra 3 blinkers after you stop them. This can be very helpful as you turn them on and quickly off but the other participants can still see your intention. Many cars have this feature, however, it can be turned off when not desired. Disabling this also disables the yellow circle/turn signals to flash upon turning ON/OFF
8* When the AUTO ON/OFF is turned on, the headlight state is automatically saved/restored when the display turns on/off. This includes all the states Turning off this feature means every time you need to manually turn on/off the headlight